|
| |
 |
Peristaltic pumps are used to pump clean or
sterile fluids; the pump cannot contaminate the fluid.
Good
for aggressive fluids;
the fluid cannot contaminate the pump. High solids,
slurries and other materials where isolation of the product from the
environment, and environment from the product are critical. |
|
Also in this Category:
Syringe Gun
Air Free Peristaltic
Vacuum Pen
Flux Pens
Bottle Caps
Other Dispensers
You may also need:
Syringes
Tip Caps
End
Caps
Syringe
Adater
Finger
Switch
Syringe
Filler
Syringe Filling
Also related:
Needles & Tips
Accessories
Dispensing Help
Doming & Potting
Solder Dispensing
Solder Mask
Premixed/Frozen
|
By using a step motor, the
IntelliSpense™ Air Free Peristaltic Pump does not
require an air source. It can achieve 0.9 degree precision and 0 ~ 120
rpm. This precision dispenser can process low
viscosity fluids in minute quantities and is
suitable for a variety of fluids, especially CA.
The genuine Teflon delivery
path can easily dispense any of the
difficult-to-dispense Cyanoacrylates.
Click here for typical setup.
Because the only part of the pump in contact with the
fluid being pumped is the interior of the tube, it is easy to sterilize
and clean the inside surfaces of the pump. Furthermore,
the lack of valves, seals and glands makes
them comparatively inexpensive to maintain, and the use of a hose or
tube makes for a relatively low-cost maintenance item compared to other
pump types.
IntelliSpense™
Air Free Peristaltic
Specification
Size:
4” W X 6 ¾“ L X 3 ¾” H
Weight:
2
½ Pounds
Input Power:
110 VAC And 220 VAC
Voltage:
24 VDC
Air Input:
None
Air Output:
None
Counter:
Digital Timer 0.01 - 99.00 Sec
Vacuum:
Adjustable
Control:
Continuous or Momentary
Part #
Description
9999111
Rotary Peristaltic Dispenser
9999111DP
Dispensing Pen for above
208822T
Teflon tube 3m (OD 1.21mm ID 0.71mm)
208823T
Teflon tube 3m (OD 1.16mm ID 0.66mm)
208826T
Teflon tube 3m (OD 0.92mm ID
0.46mm)
|
|
|
|
| |
|
