|
 |
Perfect for Speaker Assembly.
The Z-axis tilt is easily adjusted to
dispense either on a vertical wall within a cylindrical part or on an
outside wall.
The system is programmable to control dispense delay,
rotation delay, degree of rotation and wait period before cycling.
Each side of the dual table
RotarySpense Flexible Rotary Dispense System is completely
independent. The system is easily configured for use with
a syringe or a valve or
a combination of one of each depending on need.
|
|
RotarySpense Flexible Rotary Dual Dispense System
Because each side
is independent, two completely different parts can be
loaded to make multi joining applications faster, or run the same parts to
increase throughput. The
two sides are individually programmable and configurable for syringe or
valve dispensing. Each side can run at any setting, leaving the operator
free to unload/load one side while the other is running. If the start button
for the side that is not running is pressed, it will begin to run after the
other side is finished, providing a semiautomatic mode in which to run at
higher speeds.
Features Include
-
PLC Controlled
-
Rotary Device on Base of Unit
-
Servo Driven Motor for Rotation
-
Control Adjustment for Rotation Speed
-
Control Adjustment for Degree of Rotation
-
Includes Z-Axis Slide
-
Built in Valve Controller
-
Option to Connect any valve
-
Optional Dual Motors on Base
-
Optional Dual Valves on Z-Slide
-
Fully Programmable Control System
Features
- The independent support
struts allow you to
automatically dispense from nearly any angle; vertical, horizontal
or anything in-between.
- Speed, start and stop delays are fully programmable for
each side, or for one table in the single configuration.
- Graphical OIT, for setup and
informational display.
- Integrated dispensing control, no external dispenser is
required.
- Dispensing
valves are not included.
Operation
The Z-axis tilt is easily adjusted to
dispense either on a vertical wall within a cylindrical part or on an
outside wall. The system is fully programmable to control dispense delay,
rotation delay, degree of rotation and wait period before cycling.
Features
- Dispenses in circles from 0-900º
- Adjustable Z-axis including tilt control
- Variable speed table
- Simple to set up and operate
- Fully programmable for perfect dispensing
Order
6111117
RotarySpense Flexible Dual Table Dispense
System
6111118 RotarySpense Flexible Single Table Dispense
System
|
