 |
The
5101292 Front Closing Valve
is a versatile dispense valve for single-component bead, dot,
or potting. Featuring a lightweight,
compact design, the 5101292 is perfect
for automated and handheld processes. Also available as
5101292-MIC with
Micrometer Adjustment,
5101293-HV High
Volume Valve and
5101293-HVC High Volume Carbide Valve.
Click any of the links above to go directly to their product pages. |
|
In this Category:
Standard Front Closing
Front Closing Mic
Front Closing Volume
Other Valves
You may also be
interested in:
Dispensers
Valve Controller
Dispense Valves
Reservoirs
Robot
Platform
Also of interest;
Precision Needles
Needle Nozzles
Thin Wall tips
Dispensing
Help
Doming & Potting
Solder Dispensing
|
Use this valve on one of our
robots, on a
stand or
take a
look at our selection of
valve handles for easy manual use.
For a typical valve
setup,
click here.
Front Closing Valves
operate by a combination of pneumatic and mechanical functions - by a
regulated flow of air pressure and a spring assist. These combine to
help move and manage material that fills the interior chamber. The
pressure forces the valve to open, which in turn lifts the needle,
permitting fluid to flow.
The length of the needle stroke is determined by the stroke
adjustment knob located at the top of the valve. Using a timer,
the air solenoid will then close and force the needle down. In addition
to the air pressure, there is a spring assist to help close the
opening, giving you a clean, sharp cutoff, eliminating messy
dripping and stringing.
This is an excellent all purpose, single material valve, used
in a variety of applications, including beads, gaskets, shots large and
small (using the micro version) potting and bonding. This valve is
referred to as a front closing valve, needle valve, high pressure valve,
or silicone valve, and is perfect for grease dispensing, lubricant
dispensing valve, silicone dispensing. As always, be sure to check for
material compatibility. If the material is gritty, there is a carbide
steel version available.
5101292 Front Closing Valve
Features
-
Stainless steel fluid body for superior material
compatibility.
-
Divorced valve design prevents material
contamination of the air body.
-
Adjustable flow control.
-
Reversible valve seat.
-
Spring-assisted valve closure for reliable cycle
stops.
-
Compatible with all Luer Lock needle tip designs.
-
High
pressure for consistent processing of viscous materials.
5101292 Front Closing Valve Specifications
Dimensions: 152 mm x 19 mm x 19 mm (6.00 in x 0.75 in x 0.75 in)
Weight: 6 oz
Viscosity Range: 1 cps - Paste
Operating Air Pressure: 30-100 PSI
Maximum Fluid Pressure: 3500 PSI
Wetted Parts: Stainless Steel, Viton, Teflon®
5101292 Front Closing Valve Drawing. Part #
Description
5101292
Front Closing, high pressure
valve.
5101292-SP 5101292 SS
Front Closing Valve Spare Parts Kit
7080003
Electric Finger Switch, Mount to Front Closing Valves
7080006
Valve Stand
|
|
