|
| |
|
UV adhesives
can be
cured with
exacting control using
our Readymax™
UV Curing Systems. These feature-rich
units are designed to give you accurate curing cycles and long life. Please feel free to call if you have
any questions: For specifications click on pictures or the
orange links below:
Click on
Orange Links
for
Specifications, Features and more... |
|
In this Category:
ReadyMax
UV
UV Floods
UV Spots
UV Accessories
UV Applications
UV Reservoir
You may also be
interested in:
You may also be
interested in:
Dispensers
Needles
& Tips
Pneumatic Syringes
Manual
Syringes
Dispense Valves
Valve Controller
Reservoirs
Robots
Also of interest;
Precision Needles
Needle Nozzles
Thin Wall tips
Dispensing
Help
Doming & Potting
Solder Dispensing Also of
interest;
Dispensing
Help
Doming & Potting
Solder Dispensing
|
 |
Rea dyMax©
UV
Flood
Curing Systems
feature full power
no-wait restart from standby and offer the most repeatable exposures
in its class.
ReadyMax
UV flood curing systems and adjustable stands also feature a wraparound
full-backed shield (shown left) as options.
With 600 watt power supply, this system is capable of 150mW/cm2. The
Auto-Ranging 90-132 / 180-265 VAC line input allows the
UV flood
to be used anywhere...more |
 |
ReadyMax UV Spot
features exceptional lamp life. The lamp is mounted vertically, allowing
the arc to fall in a straight line.
ReadyMax UV Spot's
100W lamp delivers the highest UVA
intensity per lamp power in the industry, >10W/cm2 output, maximizing adhesive curing speed without overheating sensitive substrates
being assembled...more
|
|
 |
Spot Accessories include light
guides. There can be 7% loss for length and a 3.65% loss per meter due to liquid. Loss on a 1M light guide is about 3.65% + 7% = 10.65%.
Light guides matter! Choose liquid or fiber...more |
 |
UV Accessories include Stands, Shields, Power Supply, Intensity Controller, Lamps, Fan Foam Filters, Filter Glass, Flood Thumbscrews, Flood Height
Adjust Knobs, Interface Software, Foot Pedal, Shutter Control,
Instrumentation Manual, Economy Spot, etc...more
|
|
Reactive
materials called photo initiators are added to resins for adhesive
bonding, coating, sealing, and printing. The artificially produced
Ultraviolet light will cure these adhesives by causing the liquid resin to
polymerize, thus becoming a solid. This could be compared to two part
epoxies, which when mixed in the proper proportions, turn from a liquid to a
solid. Light curing resins, on the other hand, are single component products ready to use as received without measuring or mixing.
The relationship between the speed of
curing and lamp intensity is not linear (doubling the intensity does not
offer half the cure time). The fastest and most complete reaction will
occur at high peak intensity for a relatively short period of time. This
is a more effective type of curing as compared to a similar (or even a
higher) dose of UV light, which is spread over longer period of time.
|
| |
|
